Shure SLX24/SM86 Handheld Wireless System
Smart, Hard-Working Wireless.
Sound installations and working bands need powerful wireless tools that can be set up quickly and used confidently. The rugged SLX® UHF Wireless Systems exceed these demands with innovative setup features such as auto frequency scan with transmitter setup, exceptional wireless clarity, and legendary Shure microphones.
SLX Wireless Handheld System. Includes SLX2/SM58 Handheld Transmitter and SLX4 Diversity Receiver. The SM58 is the legendary choice of vocal performers around the globe.
Smart, Hard-Working Wireless.
Sound installations and working bands need powerful wireless tools that can be set up quickly and used confidently. The rugged SLX® UHF Wireless Systems exceed these demands with innovative setup features such as auto frequency scan with transmitter setup, exceptional wireless clarity, and legendary Shure microphones.
SLX Wireless Handheld System. Includes SLX2/SM58 Handheld Transmitter and SLX4 Diversity Receiver. The SM58 is the legendary choice of vocal performers around the globe.
• SM86 Vocal Microphone
• A rugged condenser microphone that features a tailored frequency response for clear reproduction of vocals. Built-in three-point shock mount and two-stage pop filter.
• Cardioid, Condenser
• Frequency response: 50 to 18,000 Hz
• Rugged construction withstands the rigors of touring sound
SLX2 Handheld Transmitter
• Frequency response: 50 to 15,000 Hz
• Automatic Transmitter Setup
• Backlit LCD with timeout feature
• 470 - 782 MHz operating range
SLX Wireless Systems feature the patented Audio Reference Companding for crystal-clear sound beyond the limits of conventional wireless technology.
• Automatic Frequency Selection
• Automatic Transmitter Setup
• 960 Selectable frequencies across 24 MHz bandwidth
• Detachable 1/4 wave antennas
• Microprocessor-controlled diversity
• RF presence LED
• 5-segment audio meter
• Multi-function, backlit LCD
• Low battery indicator
• Frequency and power lockout
• Rugged metal chassis
• Volume control on rear of unit
• 1/2 rack design
• Furnished rack hardware
• Non-slip bumpers for use out of rack
• XLR and 1/4" outputs
• Optional logic functionality for software echo cancellation and remote battery life monitoring (SLX4L only)
• A rugged condenser microphone that features a tailored frequency response for clear reproduction of vocals. Built-in three-point shock mount and two-stage pop filter.
• Cardioid, Condenser
• Frequency response: 50 to 18,000 Hz
• Rugged construction withstands the rigors of touring sound
SLX2 Handheld Transmitter
• Frequency response: 50 to 15,000 Hz
• Automatic Transmitter Setup
• Backlit LCD with timeout feature
• 470 - 782 MHz operating range
SLX Wireless Systems feature the patented Audio Reference Companding for crystal-clear sound beyond the limits of conventional wireless technology.
• Automatic Frequency Selection
• Automatic Transmitter Setup
• 960 Selectable frequencies across 24 MHz bandwidth
• Detachable 1/4 wave antennas
• Microprocessor-controlled diversity
• RF presence LED
• 5-segment audio meter
• Multi-function, backlit LCD
• Low battery indicator
• Frequency and power lockout
• Rugged metal chassis
• Volume control on rear of unit
• 1/2 rack design
• Furnished rack hardware
• Non-slip bumpers for use out of rack
• XLR and 1/4" outputs
• Optional logic functionality for software echo cancellation and remote battery life monitoring (SLX4L only)
Audio Output Level (ref. +/– 38 kHz deviation with 1 kHz tone)
XLR connector (into 600 Ohm load): –13 dBV
1/4 inch connector (into 3000 Ohm load): –2 dBV
Output Impedance
XLR connector: 200 Ohms
1/4 inch connector: 1 kilohm
XLR output
Impedance balanced
Pin 1: Ground (cable shield)
Pin 2: Audio
Pin 3: No Audio
Sensitivity
-105 dBm for 12 dB SINAD, typical
Image Rejection
>70 dB, typical
Power Requirements
12 to 18 Vdc at 150 mA, supplied by external power supply
Dimensions
42 mm H x 197 mm W x 134 mm D (1.65 x 7.76 x 5.28 in.)
Weight
816 g (1 lb. 13 oz.)
Housing
Galvanized steel
Audio Input Level
+2 dBV maximum at -10dB position
-8 dBV maximum at 0dB position
Gain Adjustment Range
10dB
RF Transmitter Output
30 mW maximum (dependent on applicable country regulations)
Dimensions (including SM58 cartridge)
254 mm x 51 mm dia. (10 x 2 in.)
Weight
290 grams (10.2 oz.) without batteries
Housing
Molded PC/ABS handle and battery cup
Power Requirements
2 AA size alkaline or rechargeable batteries
Battery Life
>8 hours (alkaline)
XLR connector (into 600 Ohm load): –13 dBV
1/4 inch connector (into 3000 Ohm load): –2 dBV
Output Impedance
XLR connector: 200 Ohms
1/4 inch connector: 1 kilohm
XLR output
Impedance balanced
Pin 1: Ground (cable shield)
Pin 2: Audio
Pin 3: No Audio
Sensitivity
-105 dBm for 12 dB SINAD, typical
Image Rejection
>70 dB, typical
Power Requirements
12 to 18 Vdc at 150 mA, supplied by external power supply
Dimensions
42 mm H x 197 mm W x 134 mm D (1.65 x 7.76 x 5.28 in.)
Weight
816 g (1 lb. 13 oz.)
Housing
Galvanized steel
Audio Input Level
+2 dBV maximum at -10dB position
-8 dBV maximum at 0dB position
Gain Adjustment Range
10dB
RF Transmitter Output
30 mW maximum (dependent on applicable country regulations)
Dimensions (including SM58 cartridge)
254 mm x 51 mm dia. (10 x 2 in.)
Weight
290 grams (10.2 oz.) without batteries
Housing
Molded PC/ABS handle and battery cup
Power Requirements
2 AA size alkaline or rechargeable batteries
Battery Life
>8 hours (alkaline)
| Brand | Shure |
|---|---|
| Discount | Additional 10% OFF |
| video | No |
| This Product Qualifies for Free Shipping | Yes |
| Freeshipping | Free Shipping |
| SKU | SHURE-SLX24/SM86 |
| MPN (manufacturer part number) | SLX24SM86 |
| Is Product Available for Purchase with Google Checkout | Yes |
Check items to add to the cart or select all
