Shure PGXD24/SM86 Digital Wireless System with SM86 Microphone

24-bit / 48kHz digital technology for incredibly accurate sound
Shure microphones trusted by musicians for over 80 years
Scan and sync instantly and automatically sets up the system
Up to 10 hours of continuous use from 2 AA batteries
Up to 200 ft (~60m) range for total wireless freedom
True digital diversity for a rock-solid wireless signal
900 MHz operation free from TV signal interference
Adjustable gain matches variable input levels
Up to 5 systems can be used at once
Rugged construction for reliable performance show after show
Durable hard shell padded case gets your gear from gig to gig

PGXD4

The Shure PGXD4 receiver offers innovative 24-bit, 48 kHz digital audio technology for wireless that sounds like wired. True digital diversity means two antennas and two independent recievers are constantly working to provide rock-solid RF signal, and one touch scan finds a clear frequency instantly, making set up a snap.
24-bit / 48kHz digital technology for incredibly accurate sound
Automatic frequency selection locates a clear channel instantly
One-touch sync automatically syncs the transmitter and receiver
True digital diversity for rock-solid wireless signal reliability
Up to 5 compatible channels per frequency band
1/4" and XLR audio outputs
Included padded carrying case for portability and protection

PGXD2

for decades, including the legendary SM58, the PGXD2 transmits wireless audio with pure digital clarity and rock-solid reliability.
Power, mute, and battery status LED
Up to 9 hours of continuous use from 2 AA batteries
200 ft (60 m) operating range
10 dB of adjustable gain
Lockable interface prevents accidental setting changes
Rugged construction for reliable performance show after show

PGXD4
Dimensions
40 mm H X 181 mm W X 104 mm D (1.6 x 7.125 x 4.1 in.)

Weight
289 g (10.2 oz.)

Housing
ABS

Audio Output Level
(ref. ± 38 kHz deviation, 1 kHz tone)
XLR connector (into 3000 Ω load): -2.5 dBV
1/4 inch connector (into 10000 Ω load): +10 dBV

Impedance
XLR: 50 Ω
1/4 inch: 50 Ω

Sensitivity
-102 dBm @ 10-5 BER

Image Rejection
> 70 dB, typical

XLR Output
Impedance balanced
Pin 1: Ground (cable shield)
Pin 2: Audio
Pin 3: No Audio

Audio LED
Red: 2 dB below clip, Amber: 12 dB below clip,
Green: 50 dB below clip

Power Requirements
12-18 Vdc at 150 mA, supplied by external power supply

Pin Assignments
XLR: 1=ground, 2=hot, 3=cold 6.35 mm (1/4")
TRS: Tip=audio, Ring=no audio,Sleeve=ground

PGXD2
Audio Input Level
+5 dBV maximum at -10 dB gain position
–5 dBV maximum at 0 dB gain position

Gain Adjustment Range
10 dB

RF Output Level
10 mW maximum (dependent on applicable country regulations)

Housing
Molded PC/ABS handle and battery cup

Dimensions
(including SM86 cartridge)
254 mm x 51 mm dia. (10 x 2 in.)

Weight
290 grams (10.2 oz.) without batteries

Power
2 AA size batteries

Battery Life
Up to 9 hours