Shure PGX14/93 Lavalier Wireless System
It's never been easier to go wireless and sound like a pro. Shure PGX Wireless brings the superior sound of Shure Microphones together with innovative automatic setup features in nine easy-to-use packages.
PGX Wireless Systems combine superior wireless technology, automatic set-up features and legendary Shure microphones to deliver the best sounding, easiest-to-use systems in their class.
It's never been easier to go wireless and sound like a pro. Shure PGX Wireless brings the superior sound of Shure Microphones together with innovative automatic setup features in nine easy-to-use packages.
PGX Wireless Systems combine superior wireless technology, automatic set-up features and legendary Shure microphones to deliver the best sounding, easiest-to-use systems in their class.
PGX4
Automatic Transmitter Setup
Automatic Frequency Selection
90 Selectable frequencies across 18 MHz bandwidth
Up to 12 compatible systems*
1/4 wave antennas
Microprocessor-controlled diversity
Channel display LED
XLR and 1/4" outputs
PGX1
Automatic Transmitter Setup
Multi-function LED Indicator (power, lockout, mute, low battery)
3 position gain switch (mic, 0, -10)
2 AA batteries provide 8 hours of continuous use
18 MHz, 300' operating range
Dimensions:108 mm H x 64 mm W x 19 mm D (4.25" x 2.5" x 0.75")
WL93
Subminiature lavalier design; ideal size for theater, television, broadcasting, video, film, and sound reinforcement
Small, inconspicuous mounting hardware
Full, clear sound comparable to larger microphones
Smooth extended frequency response with presence rise specially tailored for chest-worn microphone operation
Controlled low-frequency rolloff reduces low-frequency clothing and room noise
Low distortion, wide dynamic range
Uniform omnidirectional polar pattern
Preamplifier assembly (SM93) can be pocketed, strapped to the body, or clipped to belt or waistband
Wide-range phantom powering (SM93) accepts all commonly used voltages
Automatic Transmitter Setup
Automatic Frequency Selection
90 Selectable frequencies across 18 MHz bandwidth
Up to 12 compatible systems*
1/4 wave antennas
Microprocessor-controlled diversity
Channel display LED
XLR and 1/4" outputs
PGX1
Automatic Transmitter Setup
Multi-function LED Indicator (power, lockout, mute, low battery)
3 position gain switch (mic, 0, -10)
2 AA batteries provide 8 hours of continuous use
18 MHz, 300' operating range
Dimensions:108 mm H x 64 mm W x 19 mm D (4.25" x 2.5" x 0.75")
WL93
Subminiature lavalier design; ideal size for theater, television, broadcasting, video, film, and sound reinforcement
Small, inconspicuous mounting hardware
Full, clear sound comparable to larger microphones
Smooth extended frequency response with presence rise specially tailored for chest-worn microphone operation
Controlled low-frequency rolloff reduces low-frequency clothing and room noise
Low distortion, wide dynamic range
Uniform omnidirectional polar pattern
Preamplifier assembly (SM93) can be pocketed, strapped to the body, or clipped to belt or waistband
Wide-range phantom powering (SM93) accepts all commonly used voltages
PGX4
Audio Output Level (ref. +/– 33 kHz deviation with 1 kHz tone)
XLR connector (into 600 Ohm load): –19 dBV
1/4-inch connector (into 3000 Ohm load): –5 dBV
Output Impedance
XLR connector: 200 Ohms
1/4 inch connector: 1 kilohm
XLR output
Pin 1: Ground (cable shield)
Pin 2: Audio
Pin 3: No Audio
Sensitivity
–105 dBm for 12 dB SINAD, typical
Image Rejection
>70 dB, typical
Power Requirements
12–18 Vdc at 150 mA, supplied by external power supply
Dimensions
40 mm H x 181 mm W x 104 mm D (1.6 x 7.125 x 4.1 in.)
Weight
327 g (11.5 oz.)
Housing
ABS
PGX1
Audio Input Level
–10 dBV maximum at "mic" gain position
+10 dBV maximum at 0dB gain position
+20 dBV maximum at –10dB gain position
Gain Adjustment Range
30 dB
Input Impedance
1 megohm
RF Transmitter Output
30 mW maximum (dependent on applicable country regulations)
Dimensions
108 mm H x 64 mm W x 19 mm D (4.25 x 2.50 x 0.75 in.)
Weight
81 grams (3 oz.) without batteries
Housing
Molded polycarbonate case
Power Requirements
2 AA size alkaline or rechargeable batteries
Battery Life
>8 hours (alkaline)
Audio Output Level (ref. +/– 33 kHz deviation with 1 kHz tone)
XLR connector (into 600 Ohm load): –19 dBV
1/4-inch connector (into 3000 Ohm load): –5 dBV
Output Impedance
XLR connector: 200 Ohms
1/4 inch connector: 1 kilohm
XLR output
Pin 1: Ground (cable shield)
Pin 2: Audio
Pin 3: No Audio
Sensitivity
–105 dBm for 12 dB SINAD, typical
Image Rejection
>70 dB, typical
Power Requirements
12–18 Vdc at 150 mA, supplied by external power supply
Dimensions
40 mm H x 181 mm W x 104 mm D (1.6 x 7.125 x 4.1 in.)
Weight
327 g (11.5 oz.)
Housing
ABS
PGX1
Audio Input Level
–10 dBV maximum at "mic" gain position
+10 dBV maximum at 0dB gain position
+20 dBV maximum at –10dB gain position
Gain Adjustment Range
30 dB
Input Impedance
1 megohm
RF Transmitter Output
30 mW maximum (dependent on applicable country regulations)
Dimensions
108 mm H x 64 mm W x 19 mm D (4.25 x 2.50 x 0.75 in.)
Weight
81 grams (3 oz.) without batteries
Housing
Molded polycarbonate case
Power Requirements
2 AA size alkaline or rechargeable batteries
Battery Life
>8 hours (alkaline)
| Brand | Shure |
|---|---|
| Discount | Additional 10% OFF |
| video | No |
| This Product Qualifies for Free Shipping | Yes |
| Freeshipping | Free Shipping |
| SKU | SHURE-PGX14/93 |
| MPN (manufacturer part number) | PGX1493 |
| Is Product Available for Purchase with Google Checkout | Yes |
Check items to add to the cart or select all
