Shure P2TR115LCL Wireless In-ear Monitor System With SE115-CL Earphones
Shure P2TR115LCL System PSM200 Hybrid Wireless Bodypack System
P2TR115LCL SystemPSM 200 Hybrid Bodypack System w/Transmixer, Wireless
PSM 200 Hybrid Bodypack System w/Transmixer, Wireless
P2T
PSM 200 System Component
The P2T TransMixer is breakthrough design for personal monitoring. It allows the user to connect two line-level or miclevel inputs directly into the transmitter. The two signals can then be mixed independently. You can connect microphones or instruments directly to the inputs or use line outputs from a mixing console. In short, no matter what the output device, you can probably plug it into the TransMixer. For use with PSM 200 monitors.
P2R
PSM 200 System Components
The P2R Hybrid Bodypack Receiver is the world's first bodypack receiver to function as a wired receiver, a wireless receiver, or both at the same time. This and other unique features, along with excellent sound quality, make the P2R an exceptional value.
SE115
Dynamic MicroDriver II
The compact SE115 is a perfect introduction to the stunning performance of Shure earphones and come in a variety of color and cable configurations. Second Generation Dynamic MicroDrivers deliver warm, detailed sound with resonant bass. Modular cable solution provided with color versions (black, red, blue and pink) provide flexible wearing options for on-the go-use, while NEW clear model has 64-inch fixed cable making it ideal for stage use or other low-profile applications.
Product Overview:
Detailed Sound with Resonant Bass
Sound Isolating Design
Speaker Type: Single Dynamic MicroSpeaker II
2-Year Limited Warranty (see warranty information)
Included Fit Kit
Shure P2TR115LCL System PSM200 Hybrid Wireless Bodypack System
P2TR115LCL SystemPSM 200 Hybrid Bodypack System w/Transmixer, Wireless
PSM 200 Hybrid Bodypack System w/Transmixer, Wireless
P2T
PSM 200 System Component
The P2T TransMixer is breakthrough design for personal monitoring. It allows the user to connect two line-level or miclevel inputs directly into the transmitter. The two signals can then be mixed independently. You can connect microphones or instruments directly to the inputs or use line outputs from a mixing console. In short, no matter what the output device, you can probably plug it into the TransMixer. For use with PSM 200 monitors.
P2R
PSM 200 System Components
The P2R Hybrid Bodypack Receiver is the world's first bodypack receiver to function as a wired receiver, a wireless receiver, or both at the same time. This and other unique features, along with excellent sound quality, make the P2R an exceptional value.
SE115
Dynamic MicroDriver II
The compact SE115 is a perfect introduction to the stunning performance of Shure earphones and come in a variety of color and cable configurations. Second Generation Dynamic MicroDrivers deliver warm, detailed sound with resonant bass. Modular cable solution provided with color versions (black, red, blue and pink) provide flexible wearing options for on-the go-use, while NEW clear model has 64-inch fixed cable making it ideal for stage use or other low-profile applications.
Product Overview:
Detailed Sound with Resonant Bass
Sound Isolating Design
Speaker Type: Single Dynamic MicroSpeaker II
2-Year Limited Warranty (see warranty information)
Included Fit Kit
P2T
Key Features: Built-in audio limiter, Front mounted antenna, Two mic/line input channels for mix control, 1/2 Rack space
Operating Controls: Input level control, Frequency select
LED Indicators: Tri-color input level, Frequency
Inputs: Two Mic/line, XLR-1/4 in. combo input channels
Outputs: Two XLR split outputs
P2R
Key Features: Operates as a wired or wireless bodypack, or both simultaneously
Other Features: Frequency locator, Built-in headphone limiter, Integrated cable management, High-impact plastic chassis, 1/4" Line input jack with high/low gain switch
Operating Controls: Volume knob, Frequency select
LED Indicators: Power, RF reception, Frequency, Limiter, Low battery
SE115
Detailed Sound with Resonant Bass
Sound Isolating Design
Speaker Type: Single Dynamic MicroSpeaker II
2-Year Limited Warranty (see warranty information)
Included Fit Kit
Key Features: Built-in audio limiter, Front mounted antenna, Two mic/line input channels for mix control, 1/2 Rack space
Operating Controls: Input level control, Frequency select
LED Indicators: Tri-color input level, Frequency
Inputs: Two Mic/line, XLR-1/4 in. combo input channels
Outputs: Two XLR split outputs
P2R
Key Features: Operates as a wired or wireless bodypack, or both simultaneously
Other Features: Frequency locator, Built-in headphone limiter, Integrated cable management, High-impact plastic chassis, 1/4" Line input jack with high/low gain switch
Operating Controls: Volume knob, Frequency select
LED Indicators: Power, RF reception, Frequency, Limiter, Low battery
SE115
Detailed Sound with Resonant Bass
Sound Isolating Design
Speaker Type: Single Dynamic MicroSpeaker II
2-Year Limited Warranty (see warranty information)
Included Fit Kit
P2T
RF Output Power
30 mW (+15 dBm) typical conducted (country dependent)
Modulation Limiter
Internal peak limiter (>10:1 hard knee compression)
Antenna
1/4 Wavelength, semi-rigid, PCB Mount
P2T Audio Input
Connector Type: XLR-1/4-inch combo
Configuration: electronically balanced
Actual Impedance: 1 kilohm
Nominal Input Level: 25 dBu @ 1/2 volume (12 o'clock)
Maximum Input Level: 5 dBu @ 1/2 volume (12 o'clock)
Pin Assignments:
XLR: 2=hot; 3=cold, 1=ground
1/4: Tip = hot, Ring = cold, Sleeve=ground
Phantom Power Protection? Yes: Up to 52 Vdc
Current
170 mA maximum
Dimensions
220 mm x 140 mm x 40 mm (8.6 in. x 5.6 in. x 1.7 in.)
Net Weight
370 g (13 oz.)
P2T Audio Outputs
Passive connection parallel with input:
Connector Type: XLR
Configuration: electronically balanced
Pin Assignments: 2 = hot ; 3 = cold, 1 = ground
Phantom Power Protection? Yes: Up to 52 Vdc
Power Requirements
Operating voltage 12-18 Vdc
Supplied with one of the following external power supplies:
Model PS20: 120 VAC, 60 Hz input.
Model PS20E, Model PS20UK: 230 VAC, 50/60 Hz input.
P2R
RF Sensitivity
-109 dBm typical
Squelch Threshold
-102 dBm typical
Antenna
Attached Whip
Audio Input Connector
Connector Type: 1/4-inch Mono
Impedance: 1 megohm
Maximum Input Level: LO = +0 dBu; HI = 10 dBu
Frequency Response: 30 Hz to 20 kHz (+/-3 dB); earphone dependent
Power Requirements
9 V alkaline battery, Duracell® type MN1604 recommended
Battery Life
Volume Dependent
Wired (RF Off): 6 hours
Wireless (RF On): 4 hours
Audio Output Connector
1/8 inch (3.5 mm)
Minimum Load Impedance
8 ohms
Net Weight
100 g (3.52 oz.), less battery
Overall Dimensions
122 mm x 73 mm x 32 mm (4.809 in. x 2.875 in. x 1.251 in.)
SE115
Speaker Type
Dynamic MicroDriver II
Sensitivity (1mW)
105 dB SPL/mW
Impedance (1kHz)
16 Ω
Frequency Range
22Hz – 17.5kHz
Cable Length
Black, Red, Blue Pink (with Extension): 54 inch
Clear: 64 inch fixed cable
Color
Available in Black, Red, Blue, Pink and Clear
RF Output Power
30 mW (+15 dBm) typical conducted (country dependent)
Modulation Limiter
Internal peak limiter (>10:1 hard knee compression)
Antenna
1/4 Wavelength, semi-rigid, PCB Mount
P2T Audio Input
Connector Type: XLR-1/4-inch combo
Configuration: electronically balanced
Actual Impedance: 1 kilohm
Nominal Input Level: 25 dBu @ 1/2 volume (12 o'clock)
Maximum Input Level: 5 dBu @ 1/2 volume (12 o'clock)
Pin Assignments:
XLR: 2=hot; 3=cold, 1=ground
1/4: Tip = hot, Ring = cold, Sleeve=ground
Phantom Power Protection? Yes: Up to 52 Vdc
Current
170 mA maximum
Dimensions
220 mm x 140 mm x 40 mm (8.6 in. x 5.6 in. x 1.7 in.)
Net Weight
370 g (13 oz.)
P2T Audio Outputs
Passive connection parallel with input:
Connector Type: XLR
Configuration: electronically balanced
Pin Assignments: 2 = hot ; 3 = cold, 1 = ground
Phantom Power Protection? Yes: Up to 52 Vdc
Power Requirements
Operating voltage 12-18 Vdc
Supplied with one of the following external power supplies:
Model PS20: 120 VAC, 60 Hz input.
Model PS20E, Model PS20UK: 230 VAC, 50/60 Hz input.
P2R
RF Sensitivity
-109 dBm typical
Squelch Threshold
-102 dBm typical
Antenna
Attached Whip
Audio Input Connector
Connector Type: 1/4-inch Mono
Impedance: 1 megohm
Maximum Input Level: LO = +0 dBu; HI = 10 dBu
Frequency Response: 30 Hz to 20 kHz (+/-3 dB); earphone dependent
Power Requirements
9 V alkaline battery, Duracell® type MN1604 recommended
Battery Life
Volume Dependent
Wired (RF Off): 6 hours
Wireless (RF On): 4 hours
Audio Output Connector
1/8 inch (3.5 mm)
Minimum Load Impedance
8 ohms
Net Weight
100 g (3.52 oz.), less battery
Overall Dimensions
122 mm x 73 mm x 32 mm (4.809 in. x 2.875 in. x 1.251 in.)
SE115
Speaker Type
Dynamic MicroDriver II
Sensitivity (1mW)
105 dB SPL/mW
Impedance (1kHz)
16 Ω
Frequency Range
22Hz – 17.5kHz
Cable Length
Black, Red, Blue Pink (with Extension): 54 inch
Clear: 64 inch fixed cable
Color
Available in Black, Red, Blue, Pink and Clear
| Brand | Shure |
|---|---|
| Discount | Additional 10% OFF |
| video | No |
| This Product Qualifies for Free Shipping | Yes |
| Freeshipping | Free Shipping |
| SKU | SHURE-P2TR115LCL |
| MPN (manufacturer part number) | P2TR115LCL |
| Is Product Available for Purchase with Google Checkout | Yes |
Also Recommended
|
|
Check items to add to the cart or select all
-
-
Shure PSM900 Wireless In-ear Monitoring System With SE425CLAdd to WishlistMSRP: $1,800.00
Our Price: $1,330.00
