Crown Audio XLS5000D 1100W Power Amplifier

eliable design incorporates many popular features
Housed in a rugged, all-steel 2U chassis (3U in the XLS 5000)
Efficient forced-air fans prevent excessive thermal buildup
Electronically balanced XLR inputs; touchproof binding post and Speakon® outputs
Precision detented level controls, power switch, power LED, and six LEDs which indicate signal, clip and fault for each channel.
Three-Year, No-Fault, Fully Transferable Warranty completely protects your investment and guarantees its specifications

Stereo, 2 ohms (per ch.) 2500w

Stereo, 4 ohms (per ch.) 1800W

Stereo, 8 ohms (per ch.) 11000W

Bridge-Mono, 8 ohms 3600W

Bridge-Mono, 4 ohms 5000w


Sensitivity (volts RMS) for full rated power at
4 ohms
1.25
Frequency Response (at 1 watt, 22 Hz - 20 kHz)
+0 dB, –1 dB
Signal to Noise Ratio below rated power (20 Hz to
20 kHz, inputs terminated)
A-weighted, below rated power
No weighting, below rated power
> 100 dB
> 95 dB
Total Harmonic Distortion (THD) at 1 full bandwidth power, from 20 Hz to 1 kHz
< 0.5%
Intermodulation Distortion (IMD) 60 Hz and 7 kHz at 4:1, from full rated output to –30 dB
< 0.3%
Damping Factor (8 ohm): 10 Hz to 400 Hz
> 200
Crosstalk (below rated power)
at 1 kHz
at 20 kHz
–75 dB
–50 dB
Input Impedance (nominal) (balanced,
unbalanced)
20 kilohms, 10 kilohms
Load impedance
Stereo
Bridge mono
4-8 ohms
8 ohms
AC Line Voltage and Frequency Configurations Available (± 10%)
120 VAC 60 Hz
100 VAC 50/60 Hz
220 VAC 50 Hz
230-240 VAC 50 Hz
Ventilation
Flow-through ventilation from front to back
Cooling
Internal heat sinks with forced-air cooling
Air Volume Requirements (per minute
per unit)
80.15 ft3 (2.27 m3)

Sensitivity (volts RMS) for full rated power at 4 ohms 1.25

Frequency Response (at 1 watt, 22 Hz - 20 kHz) +0 dB, –1 dB

Signal to Noise Ratio below rated power (20 Hz to 20 kHz, inputs terminated) A-weighted, below rated power No weighting, below rated power > 100 dB > 95 dB

Total Harmonic Distortion (THD) at 1 full bandwidth power, from 20 Hz to 1 kHz < 0.5%

Intermodulation Distortion (IMD) 60 Hz and 7 kHz at 4:1, from full rated output to –30 dB < 0.3%

Damping Factor (8 ohm): 10 Hz to 400 Hz > 200

Crosstalk (below rated power) at 1 kHz at 20 kHz –75 dB –50 dB

Input Impedance (nominal) (balanced,unbalanced) 20 kilohms, 10 kilohms

Load impedance Stereo Bridge mono 4-8 ohms 8 ohms

AC Line Voltage and Frequency Configurations Available (± 10%) 120 VAC 60 Hz 100 VAC 50/60 Hz 220 VAC 50 Hz 230-240 VAC 50 Hz

Ventilation Flow-through ventilation from front to back

Cooling Internal heat sinks with forced-air cooling

Air Volume Requirements (per minute per unit) 80.15 ft3 (2.27 m3)

Dimensions: Width, Height, Depth Standard 19"W XLS 5000: EIA Standard 19"W (EIA RS-310-B), 5.25” ( 13.3 cm) H x 15.5” (39.5 cm) D.

Net Weight, Shipping Weight 75 LBS