Aviom A-16II Personal Mixer
The A-16II Personal Mixer allows each performer to create a unique, customized monitor mix on stage or in the studio.
The A-16II allows individual performers to create custom monitor mixes tailored to their individual needs. Designed for use in live performance or in the studio, the A-16II Personal Mixer gives each performer control over channel volume, grouping, pan, stereo spread, and master volume and tone. Every Personal Mixer in a system can create a unique monitor mix for a performer. Users can save and recall up to sixteen custom mixes as presets in their Personal Mixer.
Stereo output for wired or wireless
The stereo output from the A-16II can be used to drive wired or wireless in-the-ear monitors, headphones, powered floor wedges, an amplifier, or spot monitors.
The A-16II Personal Mixer is fully compatible with all Pro16® Series products, including Aviom's digital interface card for Yamaha® digital mixing consoles. Support for Aviom monitor mixing is available in the form of console interface cards from an ever- increasing list of digital console manufacturers including Digidesign®, Soundcraft®, Innovason®, etc. Look for the A-Net Active™ logo, and see our Partners page for additional information.
Daisy-chain and power
Mixers can be daisy-chained or connected in parallel using an A-Net Distributor. Parallel connections also allow power to be supplied to the mixers over the Cat-5e cable. As with all Pro16 Series products, Cat-5e cable runs of up to 500 feet (150 meters) are possible between devices, and there is no limit to the number of mixers in a system.
The A-16II Personal Mixer allows each performer to create a unique, customized monitor mix on stage or in the studio.
The A-16II allows individual performers to create custom monitor mixes tailored to their individual needs. Designed for use in live performance or in the studio, the A-16II Personal Mixer gives each performer control over channel volume, grouping, pan, stereo spread, and master volume and tone. Every Personal Mixer in a system can create a unique monitor mix for a performer. Users can save and recall up to sixteen custom mixes as presets in their Personal Mixer.
Stereo output for wired or wireless
The stereo output from the A-16II can be used to drive wired or wireless in-the-ear monitors, headphones, powered floor wedges, an amplifier, or spot monitors.
The A-16II Personal Mixer is fully compatible with all Pro16® Series products, including Aviom's digital interface card for Yamaha® digital mixing consoles. Support for Aviom monitor mixing is available in the form of console interface cards from an ever- increasing list of digital console manufacturers including Digidesign®, Soundcraft®, Innovason®, etc. Look for the A-Net Active™ logo, and see our Partners page for additional information.
Daisy-chain and power
Mixers can be daisy-chained or connected in parallel using an A-Net Distributor. Parallel connections also allow power to be supplied to the mixers over the Cat-5e cable. As with all Pro16 Series products, Cat-5e cable runs of up to 500 feet (150 meters) are possible between devices, and there is no limit to the number of mixers in a system.
-16-channel stereo mixer with fully adjustable pan per channel
-Sixteen Preset locations for storing custom mixes
-Channel solo, mute, and group functions
-Global trim for reducing all channel volumes
-Intuitive interface with no menus or screens to navigate
-Mounts easily on a mic stand with the optional MT-1 Mic Stand Mount
-Sixteen Preset locations for storing custom mixes
-Channel solo, mute, and group functions
-Global trim for reducing all channel volumes
-Intuitive interface with no menus or screens to navigate
-Mounts easily on a mic stand with the optional MT-1 Mic Stand Mount
Audio Output 1/4-inch TRS stereo, headphone or line level
Line/Headphone TRS Output Tip: Audio Left; Ring: Audio Right;Sleeve: Ground
Auto-detects mono plugs
A-Net Input/Output 1 A-Net input, 1 A-Net output; Category 5 (RJ45 connector)
Digital to Analog Conversion Bit Depth 24 bit
Signal to Noise Ratio (Referenced to 0dB) -103dB
Latency <0.880 msec (measured from analog input to analog output)
Pro16 A-Net uses unshielded Cat-5e UTP (or better) cable; maximum 500ft (150m) between devices
Tone Controls Treble +/-12dB at 9kHz shelving
Bass +/-12dB at 160Hz shelving
Maximum Levels (RMS) Line/Headphone outs: 1.0 watt at 100 ohms
Impedance Line/Headphone outs: 32 ohms
Power Supply
Input Voltage
Output Voltage
Plug Size External, DC, universal switching type
100-240 volts, 50/60Hz, 30VA
18-24 VDC, 0.5 amp
2 mm
Dimensions 10.75" (273 mm) wide x 5.6" (142.2 mm) deep;
2.25" (57.5 mm) high
Weight 3.4 lbs. (1.54 kg)
Options MT-1 Mic Stand Mount (uses 6-32 1/4-inch screws)
EB-1 Extension Bracket
MT-X Expansion Box (requires MT-1)
Line/Headphone TRS Output Tip: Audio Left; Ring: Audio Right;Sleeve: Ground
Auto-detects mono plugs
A-Net Input/Output 1 A-Net input, 1 A-Net output; Category 5 (RJ45 connector)
Digital to Analog Conversion Bit Depth 24 bit
Signal to Noise Ratio (Referenced to 0dB) -103dB
Latency <0.880 msec (measured from analog input to analog output)
Pro16 A-Net uses unshielded Cat-5e UTP (or better) cable; maximum 500ft (150m) between devices
Tone Controls Treble +/-12dB at 9kHz shelving
Bass +/-12dB at 160Hz shelving
Maximum Levels (RMS) Line/Headphone outs: 1.0 watt at 100 ohms
Impedance Line/Headphone outs: 32 ohms
Power Supply
Input Voltage
Output Voltage
Plug Size External, DC, universal switching type
100-240 volts, 50/60Hz, 30VA
18-24 VDC, 0.5 amp
2 mm
Dimensions 10.75" (273 mm) wide x 5.6" (142.2 mm) deep;
2.25" (57.5 mm) high
Weight 3.4 lbs. (1.54 kg)
Options MT-1 Mic Stand Mount (uses 6-32 1/4-inch screws)
EB-1 Extension Bracket
MT-X Expansion Box (requires MT-1)
| Brand | Aviom |
|---|---|
| Discount | Additional 10% OFF |
| video | No |
| This Product Qualifies for Free Shipping | Yes |
| Freeshipping | Free Shipping |
| SKU | AVIOM-A16II |
| MPN (manufacturer part number) | A-16II |
| Is Product Available for Purchase with Google Checkout | Yes |
