ART SLA-4-2 100W 4-Channel Power Amplifier
Offering superb sound quality, the ART SLA-4 studio linear power amplifier delivers the clean power you need for any professional audio application including project or professional studio environments or commercial sound installations.
The SLA-4 is a true four-channel amplifier in a single rack-space that can be switched easily from Multi-channel, Stereo and Bridged Mono Modes. Separate mode switches allow you to bridge channels 1 and 2, or channels 3 and 4, or both channel pairs. This maximizes flexibility by allowing the amp to be configured for best utilization in 2, 3, or 4 channel applications.
Designed for long-term reliability in any audio application, the SLA-4’s output is fully protected from short circuits. An ultrasonic network decouples RF from the output and helps keep the amplifier stable with reactive loads. The SLA4 is stable into loads as low as 2 ohms (stereo mode) or 4 ohms (bridged mode) making it ideal for virtually any installation application or complex system configuration.
The SLA-4 features SmartFan™, an advanced, thermal dependent fan assisted convection cooled system. The SmartFan system is dependent upon the internal ambient temperature of the unit, and runs at high or low levels depending on the amplifier’s cooling needs.
1/4-inch TRS and Euroblock balanced inputs as well as multi-way output binding posts are ensure the SLA4 can be quickly and easily tied in to any system without modification. A simple to install tamper proof cover is included.
Offering superb sound quality, the ART SLA-4 studio linear power amplifier delivers the clean power you need for any professional audio application including project or professional studio environments or commercial sound installations.
The SLA-4 is a true four-channel amplifier in a single rack-space that can be switched easily from Multi-channel, Stereo and Bridged Mono Modes. Separate mode switches allow you to bridge channels 1 and 2, or channels 3 and 4, or both channel pairs. This maximizes flexibility by allowing the amp to be configured for best utilization in 2, 3, or 4 channel applications.
Designed for long-term reliability in any audio application, the SLA-4’s output is fully protected from short circuits. An ultrasonic network decouples RF from the output and helps keep the amplifier stable with reactive loads. The SLA4 is stable into loads as low as 2 ohms (stereo mode) or 4 ohms (bridged mode) making it ideal for virtually any installation application or complex system configuration.
The SLA-4 features SmartFan™, an advanced, thermal dependent fan assisted convection cooled system. The SmartFan system is dependent upon the internal ambient temperature of the unit, and runs at high or low levels depending on the amplifier’s cooling needs.
1/4-inch TRS and Euroblock balanced inputs as well as multi-way output binding posts are ensure the SLA4 can be quickly and easily tied in to any system without modification. A simple to install tamper proof cover is included.
Extremely Low Noise, Discrete Linear Design
4 x 100 Watts/Ch @ 8 Ohms, 140 Watts/Ch @ 4 Ohms
2 x 200 Watts/Ch @ 16 Ohms, 280 Watts/Ch @ 8 Ohms (bridged)
2 x 100 Watts/Ch @ 8 Ohms & 1 x 280 Watts @ 8 Ohms (bridged)
Toroidal Transformer
10 Hz to 40 kHz Frequency Response
1/4-inch TRS, and Euroblock Balanced Inputs
Recessed "Pop Out" Detented Gain Knobs
Tamper-Proof Faceplate Included
Multi-way Binding Post Outputs
Low Profile 1U Rack-Mountable Design
SmartFan Silent Cooling System
4 x 100 Watts/Ch @ 8 Ohms, 140 Watts/Ch @ 4 Ohms
2 x 200 Watts/Ch @ 16 Ohms, 280 Watts/Ch @ 8 Ohms (bridged)
2 x 100 Watts/Ch @ 8 Ohms & 1 x 280 Watts @ 8 Ohms (bridged)
Toroidal Transformer
10 Hz to 40 kHz Frequency Response
1/4-inch TRS, and Euroblock Balanced Inputs
Recessed "Pop Out" Detented Gain Knobs
Tamper-Proof Faceplate Included
Multi-way Binding Post Outputs
Low Profile 1U Rack-Mountable Design
SmartFan Silent Cooling System
Bridged Output Power, 16 ohms 2 x 200Watts/Channel RMS
Bridged Output Power, 8 ohms 2 x 280Watts/Channel RMS
CMRR Greater Than 60dB (typical @1kHz)
Damping Factor Greater Than 100
Dimensions 1.75in x 19in x 13.5 / 44.5mm x 483mm x 190.5mm
Frequency Response 10Hz to 40kHz, +/- 0.5dB
Hum and Noise Greater Than 100dB below clipping
Input Impedance 44k ohms (balanced) / 22k ohms (unbalanced)
Input Sensitivity 1V for full power output into 8 ohms
Input/Output Connections 1/4-inch TRS/Euroblock (Input) / Multi-Way Binding Post (Output)
Minimum Load Impedance, Mono 4 ohms (Bridged)
Minimum Load Impedance, Stereo 2 ohms (Stereo)
Power Requirements 120VAC 60Hz 1000 watts (max)
Slew Rate Greater Than 20V/uS
Stereo Output Power, 4 ohms 4 x 140Watts/Channel RMS
Stereo Output Power, 8 ohms 4 x 100Watts/Channel RMS
Total Harmonic Distortion Less Than 0.05% (typical)
Transformer Type Toroidal
Weight 19.8lbs / 9.0kgs
Bridged Output Power, 8 ohms 2 x 280Watts/Channel RMS
CMRR Greater Than 60dB (typical @1kHz)
Damping Factor Greater Than 100
Dimensions 1.75in x 19in x 13.5 / 44.5mm x 483mm x 190.5mm
Frequency Response 10Hz to 40kHz, +/- 0.5dB
Hum and Noise Greater Than 100dB below clipping
Input Impedance 44k ohms (balanced) / 22k ohms (unbalanced)
Input Sensitivity 1V for full power output into 8 ohms
Input/Output Connections 1/4-inch TRS/Euroblock (Input) / Multi-Way Binding Post (Output)
Minimum Load Impedance, Mono 4 ohms (Bridged)
Minimum Load Impedance, Stereo 2 ohms (Stereo)
Power Requirements 120VAC 60Hz 1000 watts (max)
Slew Rate Greater Than 20V/uS
Stereo Output Power, 4 ohms 4 x 140Watts/Channel RMS
Stereo Output Power, 8 ohms 4 x 100Watts/Channel RMS
Total Harmonic Distortion Less Than 0.05% (typical)
Transformer Type Toroidal
Weight 19.8lbs / 9.0kgs
| Brand | ART |
|---|---|
| Discount | Additional 10% OFF |
| video | No |
| This Product Qualifies for Free Shipping | Yes |
| Freeshipping | Free Shipping |
| SKU | ART-SLA-4 |
| MPN (manufacturer part number) | SLA-4 |
| Is Product Available for Purchase with Google Checkout | Yes |
